Generic selectors
Exacte match
Productname
Characteristics
Post Type Selectors
Products

TRIGON Chemie Datasheet

Pentasol AGS-DM

Mixture of Dimethylesters of adipic, glutaric and succinic acids
Reaction mass of dimethyl adipate and dimethyl glutarate and dimethyl succinate
Structural formula of  Pentasol AGS-DM
CAS-no.:
106-65-5/1119-40-4/627-93-0
EC no.:
203-419-9/214-277-2/211-020-6
Specification:
Appearance:clear, colourless liquid
Acid no. (mg KOH/g):max. 0.5
Colour (Hazen):max. 15
Diester (%):min. 99.0
Dimethyl adipate (%):10 - 25
Dimethyl glutarate (%):55 - 65
Dimethyl succinate (%):15 - 25
Water (%):max. 0.1
Characteristic properties:
Flash point (°C):102
Freezing point (°C):-25
Specific gravity at 15.5°C (g/ml):1.085 - 1.099
Vapour pressure at 20°C (hPa):max. 0.08
Applications:
Pentasol AGS-DM is an inexpensive, low toxicity, high boiling point, low smell solvent. It finds use in resin cleaners, hard surface cleaners, heavy duty hard cleaners, polishes, floor wax strippers, ink cleaners, paint strippers, graffiti removers, carpet shampoos.

Solubility:
Pentasol AGS-DM can replace following solvents: Methylene chloride, isophorone, butyl diglycol, glycol ethers, cresylic acid, glycol ether acetate, ketones, acetone.

Solvents and resins show good solubility in Pentasol AGS-DM. New formulations using Pentasol Pentasol AGS-DM can be made easily and quickly, with cost savings and reduced toxicity. Pentasol AGS-DM has a similar solubility profile to isophorone, diacetone alcohol and 2-ethoxyethyl acetate (ethyl glycol acetate). In order to optimise the solvent properties, Pentasol AGS-DM is usually mixed with other solvents.

Solubility in typical solvents:
Alkohols, Esters, Glycols, Glycol ethers, Glycol ether acetates, Halogenated solvents, Heptane, Hydrocarbons (except xylene and heptane), Ketones.
Low solubility (5%) Pentasol AGS-DM + 10% non-ionic surfactant (e.g. synperoic AS ) is soluble in water and furthermore it is partially soluble in Xylene.

Most resins are soluble in Pentasol AGS-DM e.g.:
Acryl, alkyd, amino, cellulose, epoxy, phenol, phenoxy, polyester imide, polyester, polyvinylacetal, styrene, urethane resins. Polyvinylacetate is soluble in a mixture of Pentasol AGS-DM and N-methyl-2-pyrolidone (70:30).

For further details on toxicity and environmental aspects, see our safety data sheets.
Packaging:
220 kg drums, bulk
HS Taric-no.:
3824 99 92
UN-no.:
- -
Redaktion:
03/2022

Suggestions for processing and use of our products correspond to our best knowledge and are always given without obligation. There is no liability for incorrect formulations and mixing recommendations. Each processor of our products is liable for compliance with all legal regulations, including those in the field of patent law.

Your product enquiry

We will send you a detailed reply soon.

By sending the form I accept the Privacy Policy.