Appearance: | Granules |
Colour: | Dark grey |
Particel size (µm): | D100 <10 |
Inorganic lubricants for thermoplastics. Acts as a lubricant additive to improve the tribological
properties of thermoplastics. Main applications are polyamide compounds (PA), polyoxymethylene
(POM) and polyester compounds.
We supply Molybdenum disulfide as a masterbatch in various carriers (PA, LDPE and EVA).
The variantes in 50% LDPE and 70% in EVA are universally suitable for various applications. Because
of a low dosage (typically 3-10%), the proportion of the carrier substance (LDPE or EVA) in the
final polymer is so low that generally there is no change in the properites of the final product.
In the case of polyamide compounds, we recommend the use of 40% MoS2 in polyamide (PA),
to avoid the use of a foreign carrier. The molybdenum disulfide used, has a small particle size
and therefore the product has excellent dispersion characteristics in the final polymer.
Suggestions for processing and use of our products correspond to our best knowledge and are always given without obligation. There is no liability for incorrect formulations and mixing recommendations. Each processor of our products is liable for compliance with all legal regulations, including those in the field of patent law.
We will send you a detailed reply soon.
TRIGON Chemie GmbH
Breitwiesenstrasse 1
D-Schluechtern-Germany
Phone: +49 6661 9659 – 0
Fax.: +49 6661 9659-26
Email: info@trigon-chemie.com