Generic selectors
Exacte match
Productname
Characteristics
Post Type Selectors
Products

TRIGON Chemie Datasheet

Masterbatch Molybdenum disulfide 40% in PA

Molybdenum disulphide
Structural formula of  Masterbatch Molybdenum disulfide 40% in PA
CAS-no.:
1317-33-5
EC no.:
215-263-9
Specification:
Appearance:Anthracite granules
Density (g/ml):1.4 - 1.7
Water (%):Max. 1.2
Number of pellets / g:30 -70
Characteristic properties:
Relative viscosity (g/ml):2.7
Applications:
Inorganic lubricants for thermoplastics. Acts as a lubricant additive to improve the tribological properties of thermoplastics. Main applications are polyamide compounds (PA), polyoxymethylene (POM) and polyester compounds.

We supply Molybdenum disulfide as a masterbatch in various carriers (PA, LDPE and EVA). The variants in 50% LDPE and 70% in EVA are universally suitable for various applications. Because of the low dosage (typically 3-10%), the proportion of the carrier substance (LDPE or EVA) in the final polymer is so low that generally there is no change in the properties of the final product.

In the case of polyamide compounds, we recommend the use of 40% MoS2 in polyamide (PA), to avoid the use of a foreign carrier. The molybdenum disulfide used, has a small particle size and therefore the product has excellent dispersion characteristics in the final polymer.
Packaging:
25 kg plastic bags
HS Taric-no.:
2613 90 00
UN-no.:
--
Redaktion:
10/2021

Suggestions for processing and use of our products correspond to our best knowledge and are always given without obligation. There is no liability for incorrect formulations and mixing recommendations. Each processor of our products is liable for compliance with all legal regulations, including those in the field of patent law.

Your product enquiry

We will send you a detailed reply soon.

By sending the form I accept the Privacy Policy.