Boron Nitride BN-03 *

Product datasheet
Product enquiry

TRIGON Chemie Datasheet

Boron nitride

CAS-no.:

10043-11-5

EC no.:

233-136-6

Specification:

Purity (Boron nitride) (%):	Min. 99
B2O3 (%):	Max. 0.15
Oxygen (%):	Max. 0.8
Ca (ppm):	Max. 100
Surface (BET) (m²/g):	11 - 22
Particle size D50 (µm):	1.5 - 4
Particle size D97 (µm):	Max. 30

Applications:

Additve in high-quality special oils and specialty greases for improving the frictional properties. The product grade BN-03 is a fine, highly de-agglomerated powder which will have lower tendency to settle up in the oil dispersion. Therefore, this grade is suitable for applications in which the product is to be used both in oils and in greases.
Other grades with different particle size distributions are available, so that an accurate adjustment can be made to the final product.
Boron nitride is also used as an additive for increasing the thermal conductivity in plastics, for which we recommend mainly the quality BN-35.

Features:

High thermal conductivity
Very high lubricant properties
Low thermal expansion
Good thermal shock resistance
High electrical resistance
Low dielectric constant and loss tangent
Microwave transparency
Non toxic
Easily machined, non abrasive and lubricious
Chemically inert
Not wetted by most molten metals

HS Taric-no.:

2850 00 20

UN-no.:

- -

Redaktion:

05/2019

Suggestions for processing and use of our products correspond to our best knowledge and are always given without obligation. There is no liability for incorrect formulations and mixing recommendations. Each processor of our products is liable for compliance with all legal regulations, including those in the field of patent law.

Your product enquiry

We will send you a detailed reply soon.

TRIGON Chemie Datasheet